Cleanroom News

Home > News > Cleanroom Testing And Cleanroom Certification Services

Cleanroom Testing And Cleanroom Certification Services

  • 2022-12-15
  • View 3

A cleanroom is an extremely purified region in which temperature, air quality, and humidity are kept under strict management. The atmosphere in a cleanroom environment is filtered to remove other contaminants and dust particles Cleanrooms are primarily employed for the production of equipment which is sensitive to contaminants, including hard disk drives, silicon chips, microprocessors and integrated circuits. Cleanroom testing and certification procedures comprise of examining the room for assorted parameters, including static electricity, airborne particles, relative humidity, temperature and differential pressure.

Cleanroom Testing And Cleanroom Certification Services

Cleanroom testing and certification is performed to make sure that the facility is made in conformity with the cleanroom standards that were stated.

Cleanroom Certification: HEPA Filter Setup Flow Evaluation

Cleanroom operation testing firms do cleanroom certification. These firms are designed with sophisticated and calibrated devices necessary for performing Cleanroom Performance Testing (CPT).

Several evaluations are included by the cleanroom certification testing procedure, some are required while others are not obligatory. Among the required cleanroom evaluations, the main one is as follows:

HEPA Filter Setup Flow Evaluation: HEPA cleanroom filters are highly powerful air particle filters, used to control microbes and pollutants and preserve environmental standards. The minimal efficacy revealed by means of a HEPA filter when examined using an aerosol is 99.97%.

The HEPA setup filter flow test is conducted to find flows, damage and faults in the filters. The evaluation also verifies whether or not they are installed correctly and the integrity of the filters.

Both kinds of flow tests readily available for cleanroom HEPA filters are:

* Complete flow evaluation

* Scan flow evaluation

For functions that were radioactive, simply the complete flow evaluation is allowed. Yet, for other uses, both of the evaluations may be performed.

Cleanroom testing and cleanroom certification services include:Airflow volume/velocity readings – ensures both unidirectional and non-unidirectional flow areas are properly balanced and unidirectional zones are maintaining proper air patterns

Room air exchange rate [RAER] – confirms a proper ventilation rate is being achieved

Room differential pressure testing – verifies room differential pressures meet requirements

HEPA filter testing – documents leakage or defects and ensures HEPA filters for clean rooms provide required filtration

Non-viable particle counting – conducted per ISO 14644 or EU Annex 1, reports the amount of airborne particulate of a specified size in the clean zone

Temperature/relative humidity measurement – confirms whether HVAC controls are functioning properly and uniformly

Optional tests include:

Air balancing – adjusts airflow in the air handling systems to achieve design airflow, room air exchange rates, and pressure cascade

Airflow visualization studies – qualitatively verifies airflow direction using a source of visible fog (TSS has several fog options including carbon dioxide, glycol, and liquid nitrogen)

Viable environmental monitoring [EM] – performed on both air and surfaces to determine if any bacterial and fungal contamination is present

Compressed air and gas testing – ensures compressed air and gas systems meet the requirements of the controlled environment testing includes: non-viable and viable particulate, total hydrocarbon (oil), and dew point determination

Lighting, vibration, and sound tests – performed to design specifications to ensure worker comfort

Room recovery testing – performed to determine whether an area is capable of returning to a specified cleanliness level after non-routine exposure events

Perform additional testing as specified by client and/or ISO/IEST guidelines

For more information regarding cleanroom standards, testing and certification, and Fan Powered HEPA or Cleanroom Filters, contact Kwang Cleanroom today.

Kwang Cleanroom is proud to offer examples of a variety of our cleanroom projects below Aseptic Purification Cleanroom Of Food Factory Electronic Dust Free Cleanroom GMP Cleanroom For Medical Devices Dust Free Cleanroom Of Printing Industry Blow Molding Film Purification Cleanroom Aseptic inoculation Cleanroom For Edible Bacteria Purification Projects In Other Industries.


no cache
Processed in 1.540605 Second.